What are the advantages and disadvantages of replacing the small controller of an electric bikes with a large controller?
The battery of an electric bikes is 60V, and the motor power will not be less than 500W. If a 450W controller is used, it will definitely burn out, because the power of the controller must be equal to or slightly greater than the power of the motor. The motor, battery and controller of the electric bikes must be used together, otherwise the motor will be damaged. There are many inconspicuous but important small parts in electric bikes, and the electric bikes controller is one of them. Don't look at the controller as inconspicuous, but your electric bikes start, advance, retreat, and stop can all depend on it.

The electric bikes controller is a core control device used to control the start, operation, advance, retreat, speed, stop of the electric bikes motor and other electronic devices of the electric vehicle. It is like the brain of the electric bikes and is an important component of the electric bikes. At present, electric bikes mainly include electric bikes, electric two-wheeled motorcycles, electric tricycles, electric three-wheeled motorcycles, electric four-wheeled vehicles, battery vehicles, etc. Electric vehicle controllers also have different performance and characteristics due to different models.
The battery of an electric bikes is 60V, and the motor power will not be less than 500W. If a 450W controller is used, it will definitely burn out, because the power of the controller must be equal to or slightly greater than the power of the motor. The motor, battery and controller of the electric bikes must be used together, otherwise the motor will be damaged.

There are many inconspicuous but very important small parts in electric bikes, and the electric bikes controller is one of them. Although the controller is inconspicuous, your electric bikes can start, advance, retreat and stop. There are four reasons for the failure of the electric bikes controller:
1. Damage to the power device;
The damage of the power device generally has the following possibilities: caused by motor damage; caused by poor quality of the power device itself or insufficient selection level; caused by loose device installation or vibration; caused by motor overload; caused by damage to the power device drive circuit or unreasonable parameter design.
2. Damage to the internal power supply of the controller;
The damage to the internal power supply of the controller generally has the following possibilities: short circuit of the internal circuit of the controller; short circuit of the peripheral control component; short circuit of the external lead.
3. The controller works intermittently;
The controller works intermittently, generally there are the following possibilities: the device itself drifts in parameters under high or low temperature environment; the overall design power consumption of the controller is large, causing the local temperature of some devices to be too high, causing the device itself to enter the protection state; poor contact.

4. The connection line is worn and the connector is bad or falls off, causing the control signal to be lost.
The connection line is worn and the contact plug-in is in poor contact or falls off. Generally, there are the following possibilities: unreasonable wire selection; incomplete protection of the wire; the connector is not crimped firmly




