Introduction To The Main Components Of Lithium Battery Electric Bikes

Jun 04, 2024 Leave a message

  Introduction to the main components of lithium battery electric bikes

 

  1. Controller

  The controller is a component that controls the motor speed and is also the core of the electric bikes electrical system. It has undervoltage, current limiting or overcurrent protection functions. The intelligent controller also has multiple riding modes and self-test functions for the entire vehicle electrical components. The controller is the core component of the electric bikes energy management and various control signal processing.

news-611-432

  2. Turning handle, brake handle

  The turning handle, brake handle, etc. are the signal input components of the controller. The turning handle signal is the driving signal for the rotation of the electric bikes motor. The brake handle signal is an electrical signal output by the internal electronic circuit of the brake handle to the controller when the electric bikes brakes; after the controller receives this signal, it will cut off the power supply to the motor, thereby realizing the brake power-off function.

news-594-399

  3. Power assist sensor

  The power assist sensor is a device that detects the pedal force and pedal speed signal when the electric bikes is in the power assist state. The controller automatically matches manpower and electricity according to the electric drive power to drive the electric bikes to rotate together.

news-581-601

  4. Motor

  The most important accessory of an electric bikes is the motor. The motor of an electric bicycle basically determines the performance and grade of the vehicle. The motors used in electric bikes today are mostly high-efficiency rare earth permanent magnet motors, which are mainly divided into three types: high-speed brush + gear reduction motors, low-speed brush motors and low-speed brushless motors. High-speed brush + gear reduction motors have the best performance and are also expensive; low-speed brush motors are cheaper, but have worse performance; brushless motors have extremely high requirements for controller quality, and there are not many brands on the market. Ordinary consumers are better off choosing brands when purchasing.

The motor is a component that converts battery electrical energy into mechanical energy to drive the electric bikes to rotate. There are many types of motors used in electric bikes in terms of mechanical structure, speed range and power supply form. Common ones include: brushed gear hub motors, brushless gear hub motors, brushless gearless hub motors, brushless gear hub motors, high-disk motors, side-mounted motors, etc.

 

  Usage tips: When charging. Keep the charger well ventilated. If you smell an odor or the charger shell temperature is too high during the charging process, please stop charging immediately, check and handle it.

news-450-316

  5. Lamps and instruments

  The lamps and instruments are a combination of components that provide lighting and display the status of the electric bikes. The instrument generally provides battery voltage display, vehicle speed display, riding status display, lighting status display, etc. Intelligent instruments can also display the fault conditions of various electrical components of the vehicle.

news-707-314

Send Inquiry

whatsapp

Phone

E-mail

Inquiry